Indoor VCB Switchgear Panels

Next > >

Send Inquiry

Product Code : 02

Price And Quantity

Minimum Order Quantity
10 Piece
Price Range
100000.00 - 500000.00 INR

Product Description

Power +V

The Power +V are an Indoor VCB Switchgear Panels of voltage range 3.3kV to 11kV and current ratings from 630A to 3150A. For compactness in panels rated up to 2000A special bus raiser panel is provided with bus coupler panel extended in the rear side. IP4X degree of protection is provided externally and IP2X between compartments. Panels shall have adequate space for terminating large cable sizes. Our 11kV panels are carried out for Internal Arc Test for 40kA for 1 Sec.

Specifications
Panel Model	VCB Indoor Panel
Breaker	Vmax (31.5KA and below) and VD4 for 40KA
Supply voltage	3.3kV, 6.6kV and 11kV
Rated current	630A, 800A, 1250A, 2000A, 2500A, 3150A
Short time current rating	18.4, 25, 26.3, 31.5, 40kA
Degree of protection of panel	IP 4X, IP5X
Sheet Enclosure	i) Prime grade sheet steel treated with 7 tank process and duly powder coated for longevity OR ii) Supergalum Pre- coated Alu-zinc enclosure
Busbar	Electrical grade Aluminium or 99.9% Oxygen Free Copper
Relays	Numerical, Electromechanical relays for Feeder, Transformer, Bus, Motor and Generator protections can be provided.
Metering compartment	Is designed such that meters, indicating equipments, Relays are arranged to make maintenance and operation easy.
Current / Potential transformer:	i) Resin cast transformers designed for low smoke and flame-retardant. ii) Ratios, Accuracy & burdens as per requirement.
Standard dimensions of panel (Estimated)	W: 600 mm D: 1423 mm for Incoming / Outgoing panel and 1923mm for IN/OUT type of panel. H: 2100 mm

Our Design Standards:
Breaker	IEC 62271-100
Current transformer	IS 2705/1992 and IEC 60044-1
Potential transformer	IS 3156/1992 and IEC 60044-2
Busbar	IS 5082 for Aluminium
Sheet Steel:	IS 513
Cables	IS 694

General Features

Modular & compact for better strength and flexibility in extension.
Fully Compartmentalized construction for optimal safety and protection
For compactness in panels rated upto 2000A special bus raiser panel is provided with bus coupler panel extended in the rear side.
IP4X degree of protection is provided externally & IP2X between compartments.
Our design enables adequate space for large cable sizes. Even larger cables and additional runs rear extension is provided for cost effectiveness.
Independent exhaust vents for all HT compartment are provided for natural cooling and exit for any flue gasses.
Dedicated Circuit breaker compartment as per internationally proven ABB design.
Cassette mounted ABB Circuit Breaker with draw out feature for easy maintenance and fail-safe safety.
Live parts covered by automatic metallic shutters when breaker is racked out.
Electrical anti-pumping design avoids mishaps due to mishandling of the breaker.
Additional feature includes a separate Racking in/out mechanism which is provided in the breaker which can change from “test” to “service” positions and vice versa with the cubicle door closed.
Only Branded and type tested sub components are used in our panels.
Current and Voltage transformers are placed in chamber below Circuit breaker to avoid any kind of flashovers which may damage the breaker.
Wiring done with flexible copper cable affirming to IS 694 for Longitivity and Durability.
Optional integral earth switch can be provided on the cable side for Earthing.
We provide Foundation frame as standard supply
All hinged doors are provided with gaskets to keep away dust and water from the electrical components.
Multiple guides are provided for safe and sure engagement of fixed and moving contacts.
Breaker trolley shall be given along with the breaker panel for maintenance.